The SmartGen™ design can scale up to very large 4 MW onshore and offshore wind turbines.
Hybrid Turbines, Inc. of Lafayette, Colorado has announced their SmartGen™ hybrid gas- wind turbine system. The patent pending design burns biogas or natural gas to spin wind turbine generators 24/7 if the wind isn’t blowing. “Large wind turbines, even in good wind resource areas, typically generate rated power only 30% of the time because the wind blows intermittently or at a lower wind velocity.” states Hybrid Turbines’ President Nick Verini. “This SmartGen™ system which can be retrofitted to existing wind turbines enables them to generate power at their rated capacity 100% of the time. It can also be incorporated into new wind turbine designs. The SmartGen™ design can scale up to very large 4 MW onshore and offshore wind turbines.”
The 35 gigawatts (GW) of installed wind power capacity in America could be producing grid power 24/7. The SmartGen™ system utilizes a ground based turbo-compressor to compress air and this compressed air is used to drive a turbo air motor directly connected to the wind turbine generator. Compressed air is used because it is safe, non flammable and efficient when used in combination with the turbo air motor.
The increased output of 25 GW (70% of 35 GW) represents the generation capacity of twenty five 1,000 MW nuclear power plants. “If biogas is used then the SmartGen™ system is 100% renewable energy based (wind and/or biogas). Even if natural gas is used the electricity produced by SmartGen™ is twice as environmentally clean as burning coal. This will be increasingly important as we move to electric vehicles with batteries charged from the grid.” adds Verini.
For more information contact email@example.com or call 303-665-2346.